Acidic Water Filtration Systems Prevent Copper Pipe Corrosion on Acid Well Water

In thousands of homes on well water, acidic water causes thinning of copper pipes, pinhole leaks, and numerous copper pipe leaks over time. Acidic water filtration systems can easily correct and neutralize a low pH in well water.

The pH scale is a scale from 1 to 14. A neutral pH is 7. A ph of less than 7 is considered acidic. A pH greater than 7 is considered alkaline and is less corrosive to copper pipes than waters with a pH of less than 7.

Signs of acid water are corrosion of fixtures, blue staining (from copper pipes) or rust staining (from iron pipes). Acidic water can also cause pinhole leaks and pipe failure over time. By raising the pH to the range of 7.0 to 7.5 the water can be made alkaline which will then reduce or eliminate pipe corrosion.

In neutralizer filters, the acidic water slowly dissolves the calcium and magnesium media on contact as the water flows through the filter, raising the pH of the water and increasing the alkalinity. This eliminates the effects of corrosive water chemistries and can help to prevent corrosion of piping and fixtures.

The size of the system is directly proportional to the flow rate of the water, in gallons or liters per minute. The higher the flow rate, and the more gallons per minute flows through the pipes, the larger the system required. Generally for most homes with 1 bathroom, a 1 cubic foot size system containing 100 lbs of calcite will work well. For homes with 1 to 2 bathrooms, a 1.5 cubic foot filter is recommended. For higher flow demands and in homes with 3 to 4 bathrooms and larger families, a 2.5 cubic foot neutralizer containing 250 lbs of calcite is recommended.

This type of neutralizer also acts as a filter removing sediment and small amounts of rust from the water, and then backwashing it out once every week or so. The most common type of acid neutralizer filter has an automatic backwash control valve. The frequency and length of the backwash cycle can be easily adjusted on the control valve. Most backwashing acid neutralizer filters are set to backwash once a week for eight to ten minutes. This backwashing cleans the calcite filter media and allows the mineral media to more easily dissolve into the water over time.
Various steel pipe external coating projects are currently implemented by our company including single-layer/ double layer FEB, 2PE, 3PE, 3PP and other anti-corrosion coatings with the performed standards such as DIN 30670, DIN 30671, DIN 30678, CAN/CSA-Z245.21-M92, SY-/T4013-2002,SY/T0315-97 etc.

Anti-corrosion Pipes

Different Purposes for Which Steel Square Tube is Taken under Use

In industries, various kinds of tubes are developed that are hot dipped galvanized tubes, Steel Tubes and pipes, Black Steel Tubes, Aluminized Steel Tubes, Fence Tubes, structural steel, Mild Steel Welded Black Tubes and scaffolding pipes. Such steel tubes are developed as well as exported all over the world by several of the industries. The standards of production which are laid down through the government required to be maintained since this determines the eminence of the steel pipes as well. The sizes and the dimensions of the tubes vary. The diameter and the thickness of each pipe are different. Hence a person has to decide the purpose prior to buying the tube. Several of the shapes of the pipes are round, rectangle, hexagon and square.

Exploring the Utilization of Steel Square Tube

The chief purpose behind using such tube is that it is extremely sturdy. The configuration of such tubes varies as per the requirement. Such aluminized tubes are used in Industrial and automobile exhaust systems, HVAC industry, Muffler and many other such exercises can be seen. In the industrial and the automobile sector different sorts of tubes are utilized. The hot hollow galvanized pipes are also taken under use in these sectors. Hence the galvanized as well as the electro galvanized pipes and tubes that are utilized for engineering and industrial works required to be of high quality  with the intention that it reduces the pollution as well as the other problems to a greater extent.

Boiler Tube

Quality and affordable stainless steel seamless pipe

Seamless pipes serve a very special purpose. Due to their physical design, not only do they ensure superior strength and support, thanks to the absence of any noticeable joints in the pipe, they also look good as well. This ensures that they find application in a lot of cases where the pipes need to be in open view. There are numerous structural advantages of using a stainless steel seamless pipe as well, all of which have helped ensure a huge demand for them in the Indian market.

What advantages does a seamless pipe offer?

A stainless steel seamless pipe is made by forming a hollow tube of uniform width and circumference. He hollow structure ensures that the pipes can be easily bent to form any required shape and accommodate any structural needs of the client. So when a pipe needs to be laid out in such a manner that it will not be forming a straight line, seamless pipes are preferred over other types of stainless steel pipes.

Since the pipe can simply be bent whenever needed, there are no needs for joints in seamless pipes. An absence of joints makes these pipes several times stronger than welded ones. They can withstand higher pressure and thus find application in scenarios where a regular pipe with joints or weldings would simply break apart.

Another major advantage that seamless pipes offer is the uniformity of their size. You can be certain that any quality stainless steel seamless pipe will have uniform cross section at every point. This is the result of the formation process for these pipes where the molten steel is placed around a circular object and then formed into a hollow tube. Welded pipes, even with the most  advanced welding technologies can never come close to achieving this level of uniformity. When a pipe is needed that can be counted on to fit the design perfectly, seamless pipes are the way to go,


Strength and reliability are the two areas where seamless pipes have left all other kind of steel pipes behind. Despite slightly higher costs, they are extremely reliable and can be counted on to deliver superior performance at all times.

ERW Steel Pipes

Steel Pipes manufacturing process

Steel pipes are long hollow tubes that are used for a variety of purposes. They are produced by two distinct methods, which result in either a welded or seamless pipe. In both methods, raw steel is first cast into a more workable starting form. It is then made into a pipe, by stretching the steel out into a seamless tube, or forcing the edges together & sealing them with a weld.

Welded pipes could be manufactured by one of the process, know as Electric Resistance Welding (ERW), where in a high frequency current is being used to fuse the steel together, resulting in welding at the seam of the pipe.

Worldwide, ERW pipes are manufactured & distributed, looking at the various applications, various people are into manufacturing of steel pipes & tubes, following various Indian & International standards.

In India many organization, are engaged into manufacturing & exporting of Quality ERW Pipes. They manufactures different types of ERW Pipes namely Black Pipes, Hot Dip Galvanized Pipes, Conduit Pipes, Casing Pipes, Scaffolding Pipes & General Engineering Purpose Pipes.

These companies have huge production capacities, & holds certification of various Indian as well as International standards.

Maintaining the quality of the ERW pipes is of utmost importance too. The product must pass through stringent quality tests, before they are finally supplied. Raw Material shall be tested for Chemical Composition, Tensile Strength, Elongation and Thickness & Tolerance. Pipes shall be hydraulically tested to ensure no leakage in the pipe. Galvanized pipes must be tested for uniformity of the zinc coating.

As the quality is the lifeline of any industry, so at Steel pipes manufacturing companies, Quality is not only checked, but is monitored & produced, with the help of proactive & professional approach.

Seamless Steel Pipe

Comparison between Stainless Steel 310 and stainless steel 202 pipe

Different industrial processes require different kinds of industrial environments and hence the equipment used in them also differs in qualities. We here discuss the two commonly used stainless steel alloys viz. 310 and 202 and the usage of pipes made from them.
The stainless steel alloy 310 offers extreme resistance to oxidation and its scaling. It also has high strength even at higher and elevated temperatures. It is also extremely ductile and various shapes can be made out of it. The stainless steel 310 pipe offers continuous service that can withstand temperatures up-to 1140 degree Celsius. Their service quality decreases in the presence of sulfur gas. It has high amounts of chromium and hence provides for versatile properties of corrosion resistance. It can resist pittance, crevice, and general corrosions with ease and can also resist marine corrosion caused by high chloride content of sea water.
Stainless steel 202 pipe offers adequate corrosion resistance and strength but is more prone to cracking because of its higher carbon content. The stainless steel 200 series alloy has lower nickel content than the 300 series and is hence is less costly. It has a high carbon content that can result in cracking. In other aspects like fabricability, corrosion resistance, etc. they are similar to 300 series. Still 300 series stainless and 310 stainless steel pipes provide more corrosion resistance than their 202 counterparts.
Hence, it can be concluded that the 310 pipes provide for high corrosion resistance while 202 pipes have better strength. They are used in specific industrial climates that have different wants. While the stainless steel 310 pipe can provide for better corrosion resist in marine environments, the 202 pipes have the better strength that is much required in many other industrial processes.

 ERW Steel Pipes

General Knowledge of Seamless Steel Pipe

1.Seamless steel pipe is a long steel with hollow sections and has no joints surrounding the steel bar. It is mainly used as a pipeline to transfer the fluid, such as oil,natural gas,water and some solid materials,etc. As compared to the flexural torsional strength in the same light, it is an economic cross-section steel. The seamless steel pipes are widely used in the manufactures  and mechniacal parts,such as the oil pipe, automotive transmission shaft,bicycles aircraft,as well as buliding construction. With steel pipe manufacturing, annular parts can improve the material utilization, simplify the manufacturing process, save material and machining time. For example, the roller bearing rings and the jack sets and so on have been widely made of steel pipes. Cylindrical rube can delivery more fluid since the circle has the largest areas under the same circumference. In addition, the ring cross-section bears internal or external pressure, the force more evenly, so that vast majority of tubular steel pipes are cylindrical rubes . However, the tube also has some limitations, such as in-plane bending conditions, the pipe on the better side, rectangular tube bending strength, and a number of sets of frames, steel-wood furniture on the commonly used square, rectangular tube.

2.The pressure of seamless steel pipe

Pressure pipelines are generally composed of pieces of standard parts, so the pressure pipe design component is the selection of its standard parts. the pressure level of pipelines is determined to the pressure level of its standard parts.

Pipeline pressure level consists of two parts:

one is nominal pressure rating which is expressed in the nominal pressure of the standard parts. The other is wall thickness rating which is expressed in the wall thickness of the stand parts.

Seamless Steel Pipe

Industries require DTH Drill Pipe for their Complex Drilling Works

To meet the drilling requirements of various industrial sectors, the need for drill pipes has become inevitable. Most of the industries like construction, mining, oil &gas require DTH drill pipes to accomplish their drilling activities. The specially designed drill pipes enable a core to be easily extracted out of earth's surface or rock. The entire length of the pipe seamlessly enters beneath the earth's surface and digs out the mass to obtain even drilled holes. The profitability of these industries depends upon the drilling efficiency of the drill pipes. Hence, it is very important for the industries to choose best designed drilling tools from reputable manufacturers.

The oil and gas industries utilize such drilling pipes, to effortlessly reach down to extreme surface of the ground surface. The oilfield drill pipe is drilled into the earth vertically by using the drilling rig and the oil is obtained effectively. Construction industries also make use of DTH drill pipe to bore tunnels under waterways or major roadways of a highly populated town. The resultant bore is thereby used for a variety of utility pipelines such as, fiber optic, water, electricity, oil and gas.
DTH drill pipes are manufactured and designed in such a manner that it can effectively reduce the hardships of the drilling worker. These drilling tools do come with effective features and specifications to fulfill the different requirements of the professionals. Plumbers may require drilling pipes, to dig large holes in studs and joists. This can ease out their job of installing drains and waste pipes, beneath the surface of the Earth. Also because the plumber is drilling large holes, up to 4 inches, the right angle drill pipe will accomplish his drilling needs efficiently.
1.EU-External Upset IEU-Internal-External Upset IU-Internal Upset
2.Threads of tool joins are left-hand or right-hand
3.Threads are cooper-plated or phosphated

Drill Pipes